Blog

Changing the keyboard on a Dell XPS 15 involves several steps. Here’s a general guide to help you through the process:

Tools You’ll Need:

• A small Phillips-head screwdriver
• A plastic prying tool or spudger

Steps:

Power Down and Unplug:

• Shut down your laptop and disconnect it from any power source. Also, remove any connected peripherals.

Remove the Battery:

• If your Dell XPS 15 model has a removable battery, slide the latch to release and remove it. For models with an internal battery, you’ll need to access it later in the process.

Open the Laptop:

• Place the laptop on a clean, static-free surface. Use a small Phillips-head screwdriver to remove all screws securing the bottom cover. These are typically located around the edges of the bottom panel. Keep track of the screws as they can be different sizes.

Remove the Bottom Panel:

• Gently use a plastic prying tool to separate the bottom panel from the laptop chassis. Be careful not to damage the clips or the casing.

Disconnect the Battery:

• If the battery is internal, locate the battery connector on the motherboard and carefully disconnect it. This step is crucial to avoid any electrical damage.

Locate the Keyboard:

• The keyboard is typically secured by screws that are visible once the bottom panel is removed. On some models, the keyboard might be attached directly to the internal components or held in place by additional screws.

Remove the Keyboard Screws:

• If there are screws holding the keyboard in place, remove them using your Phillips-head screwdriver. These screws are usually located around the perimeter of the keyboard.

Release the Keyboard:

• Gently lift the keyboard from the laptop’s chassis. Be cautious of any ribbon cables connecting the keyboard to the motherboard.

Disconnect the Keyboard Cable:

• Carefully disconnect the ribbon cable connecting the keyboard to the motherboard. This usually involves lifting a small locking flap on the connector.

1. Install the New Keyboard:
   • Place the new keyboard into position and connect the ribbon cable to the motherboard. Ensure it is securely attached by lowering the locking flap.
2. Reattach the Keyboard:
   • Secure the new keyboard with the screws you previously removed.
3. Reassemble the Laptop:
   • If you removed the battery, reattach it and ensure it’s properly connected. Place the bottom panel back onto the laptop and secure it with the screws.
4. Reconnect and Power On:
   • Reconnect the power adapter and any peripherals. Power on your laptop and test the new keyboard to ensure it is functioning correctly.